User Tools

Site Tools


x40:how_to_connect_printer_to_cura

Connect Printer to Cura

You have purchased our Independent Dual Extruder 3D printer X40 LOL. Here is the method to Connect Printer to Cura
If you still have questions, please contact our customer service. Email:saleservice@entina3d.com

The first way : The network connection

Step1: After configuring the network through the web page or Wiibuilder, obtain the IP address.(See “Set Up Wi-Fi Network” )

Step2: Open the Cura(Entina). Click“Manage printers”, add “X40”.



Step3: Click“Connect OctoPrint ”,enter the IP address, and take a name. Click“Ok”.




Step4: Click“Connect ”, start to “MONITOR”.



The second way : USB cable connection

Step1: Connect the printer and computer with a USB cable.

Step2: You need to download the CH340 driver (on the download page) for the first connection.


Step3: Open the Cura(Entina). Click“Manage printers”, add X40



Step4: Start to “MONITOR”.

x40/how_to_connect_printer_to_cura.txt · Last modified: 2022/04/22 09:27 by editor