Sidebar
set_up_wi-fi_network:tina2
Table of Contents
Set up Wi-Fi network
Notices for Network Setting：
- It is not possible to use the 5GWiFi network. It needs to operate in 2.4 GHz network frequency.
- Mobile phones need to be operated with WIFI
- Local WiFi connection recommendation should not exceed 10 devices
- When installing, you need to give the mobile APP network location permission.
- Printers need to be connected in a good network environment (mobile WIFI interface can be used to check whether the network environment is generally above)
- WiFi name cannot be used in Chinese
- If you have any questions about the printer, please contact us. Our email address is：support@entina3d.com
Method 1:Set up WiFi with Wiibuilder(Windows)
Use “Wiibuilder” to set the IP for your printer.
Step1: Make sure the computer has connected to the 2.4G network, install “Wiibuilder” software form SD Card,
Step2: Open Wiibuilder，choose “ENTINA TINA2” – Apply–OK
Step3: Click “WLAN Connection”-“WiFi Profile”, enter your WIFI Name and Password, then “Save” it to SD Card, File name: “wifi”, Type: “Gcode”
Step4: Turn on the 3D printer，print“wifi.gcode”.
Step5: Then the IP(192.168.2.XX)will be displayed on the printer screen.
===== Method 2: Manual editing =====
Step1:Download this “.gcode”
Download Here：wifi.gcode_11.08.51.zip
Step2: Enter your home 2.4G network name and network password, save to TF card.
Step3: Turn on the 3D printer，print “wifi.gcode”.
Step4: Then the IP(192.168.2.XX)will be displayed on the printer screen.
==== Method 3: Using the APP distribution network(Android) ====
Step1: Download the “Poloprint Pro” for google store or App store
Step2: “Sign in”– Set “Printer wifi setting”
Step3: Search for the corresponding network “ESP32WIFIXXX” and connect (Please make sure to operate while connected to this network)
Step4: Enter your home 2.4G network name and password, then “SEND”
Step5: Restart the machine. After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
==== Using the APP distribution network(IOS) ====
Step1: Download the “Poloprint Pro” for google store or App store
Step2: “Sign in”– Set “Printer wifi setting”
Step3: Search for the corresponding network “ESP32WIFIXXX” and connect (Please make sure to operate while connected to this network)
Step4: Enter your home 2.4G network name and password, then Success
set_up_wi-fi_network/tina2.txt · Last modified: 2022/07/01 07:56 by editor
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
