Sidebar
content:spark_video
Table of Contents
Spark system video surveillance
Open the Spark page
Open the OctoPrint connection window in Wiibuilder and click Open in browser to open the main SPARK interface.
Or open your browser and enter http://xxx.xxx.xxx.xxx in the address bar
xxx.xxx.xxx.xxx is the IP address shown on the SPARK display.
Remote manual control
Enter the Control panel, first click the small house icon under X / Y and Z to home the XYZ axis, then you can click each arrow to manually control the nozzle movement.
The row of numbers below the arrow is the jog distance.
Remote start printing
Find the file to be printed in the file management bar, and click the print icon on the far right to start the print task immediately.
Switch monitoring screen
Click the two small icons in the upper right corner of the print status panel to switch to full window display mode and full-screen display mode, respectively
Full window display mode, the monitor screen fills the browser window.
Full-screen display mode. The monitoring screen fills the entire screen. Press the ESC key on the keyboard to exit the full-screen mode.
content/spark_video.txt · Last modified: 2022/03/30 07:16 by editor
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
